Zhongdi ZD-20D Wireless Soldering Iron 8W

Short Description:

•4.5V 8W micro soldering iron mini battery soldering iron of Ningbo ZD (ZD-20D)
•Takes use of 3*1.5V size AA batteries
•Heats up in less than 15 seconds,cools down in less than 30 seconds
•Can continuously operate for approx 1 hour with new batteries
•Long life tip with safety cap. Tip can be replaced easily.
•Batteries not included
•Other optional chisel tip available


Product Detail

Product Tags

Zhongdi ZD-20D Wireless Soldering Iron 8W,
Battery Soldering Iron 8W, Electric Soldering Iron Cordless, Small Solder,

Features:

•4.5V 8W micro soldering iron mini battery soldering iron of Ningbo ZD (ZD-20D)
•Takes use of 3*1.5V size AA batteries
•Heats up in less than 15 seconds,cools down in less than 30 seconds
•Can continuously operate for approx 1 hour with new batteries
•Long life tip with safety cap. Tip can be replaced easily.
•Batteries not included
•Other optional chisel tip available

 1(1)

Operation

•File off any dirt, rust or paint on the part you wish to solder.
•Heat the part with the soldering iron.

715 (2)

•Apply rosin-based solder to the part and melt it with the soldering iron. Note: when using non-rosin-based solder, be sure to apply a soldering paste to the part before applying the solder.

715 (4)

•Wait for the solder to cool and harden before moving the soldered part.

715 (6)

图片 4

Caution

•Always switch off the soldering iron after use.
•Put the cap on the tip when storing so that the cap secures the slide switch in the “OFF” position
•Do not touch the tip when it is hot.
•Do not immerse it in the water.

Warning

•Always keep tips coated with tin to ensure a long service life.
•Handle the heated soldering iron with extreme care, as the high temperature of the iron can cause fires or painful burns.
•This tool must be placed on its stand when not in use.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Package

Qty/Carton

Carton Size

N.W.

G.W.

Double Blister

100pcs

48*28*53.5cm

8.5kgs

9.5kgs

Ningbo Zhongdi Industry & Trade Co.,Ltd, a professional manufacturer of soldering station, soldering iron, and soldering related products for more than 25 years.

www.china-zhongdi.com


  • Previous:
  • Next:

  • Write your message here and send it to us